2011 HONDA XL1000V Specifications / Press Information

download
Specifications – XL1000V / XL1000V ABS (ED-type) ENGINE Type Liquid-cooled 4-stroke 8-valve DOHC 90° V- twin Displacement 996cm 3 Bore  Stroke 98  66mm Compression Ratio 9.8 : 1 Max. Power Output 69kW/7,500min -1 (95/1/EC) Max. Torque 98Nm/6,000min -1 (95/1/EC) Idling Speed 1,300min -1 Oil Capacity 4.1 litres FUEL SYSTEM Carburation PGM-FI electronic fuel injection Throttle Bore 42mm Aircleaner Viscous, cartridge-type paper filter Fuel Tank Capacity 25 litres (including 4-litre warning light reserve) ELECTRICAL SYSTEM Ignition System Computer-controlled digital transistorised with electronic advance Ignition Timing 15° BTDC (idle) ~ 55° BTDC (5,100min -1 ) Sparkplug Type IJR8B9 (NGK) Press information for 2011 XL1000V 6 Starter Electric Battery Capacity 12V/18AH ACG Output 434W Headlight 12V 60W  2 (low) / 55W  2 (high) DRIVETRAIN Clutch Wet, multiplate with coil springs Clutch Operation Mechanical; cable-actuated Transmission Type 6-speed Primary Reduction 1.682 (44/74) Gear Ratios 1 2.571 (14/36) 2 1.684 (19/32) 3 1.292 (24/31) 4 1.100 (30/33) 5 0.969 (32/31) 6 0.853 (34/29) Final Reduction 2.938 (16/47) Final Drive O-ring sealed chain FRAME Type Steel tube CHASSIS DIMENSIONS Dimensions (LWH) 2,300  930  1,465mm Wheelbase 1,560mm Caster Angle 27° 30′ Press information for 2011 XL1000V 7 Trail 110mm Turning Radius 2.58m Seat Height 838mm Ground Clearance 181mm Kerb Weight 268.7kg (F: 126.3kg; R: 142.4kg) *276.7kg (F: 130kg; R: 146.7kg) Max. Carrying Capacity 201kg Loaded Weight 469.7 kg *477.7 kg SUSPENSION Front 43mm telescopic fork, 155mm axle travel Rear Pro-Link damper, 145mm axle travel WHEELS Type Front Hollow-section triple-spoke cast aluminium Rear Hollow-section triple-spoke cast aluminium Rim Size Front 19M/C  MT2.50 Rear 17M/C  MT4.00 Tyre Size Front 110/80 R19M/C (59H) Rear 150/70 R17M/C (69H) Tyre Pressure Front 250kPa Rear 250kPa (with passenger: 280kPa) Press information for 2011 XL1000V 8 BRAKES Front 296  4.5mm dual hydraulic disc with Combined 3-piston calipers (*ABS) and sintered metal pads Rear 256  5mm hydraulic disc with Combined 3- piston caliper (*ABS) and sintered metal pads * Combined-ABS version All specifications are provisional and subject to change without notice